Danfoss AK-SM800A: six unpatched flaws, no fix in 5.4.0
Midnight Blue found six unauthenticated flaws in Danfoss AK-SM800A refrigeration controllers. No patch exists, and the researchers say firmware 5.4.0 does not fix them.
Dutch security consultancy Midnight Blue disclosed six vulnerabilities in Danfoss AK-SM800A refrigeration controllers that let a remote attacker take over a unit without logging in. No patch is available, and the researchers say the newest firmware does not fix them. Cybersecurity agencies in Belgium, Ireland and Germany told operators this week to pull the controllers off the internet. The technical write-up is on the Midnight Blue blog; the finding was reported by The Hacker News.
What's affected
Carlo Meijer of Midnight Blue says every firmware version up to and including 5.3.2 is affected; he examined 3.3.0 and 5.3.2 specifically, using firmware Danfoss offers for public download, and found the flaws in under an hour of manual review. Five of the six are in unauthenticated web request handlers running as root; the sixth is in the gateway that enforces Strict mode.
No CVE IDs have been assigned. The researchers are keeping technical details private while they work through coordinated disclosure with Danfoss, so there is no Shodan fingerprint to paste yet.
The newest release, 5.4.0 (build date estimated at 29 October from the file timestamp), is disputed:
- Midnight Blue says 5.4.0 does not patch the flaws.
- Germany's BSI first stated 5.4.0 was not affected, then corrected itself to say it "cannot rule out for now that 5.4.0 is affected."
Danfoss's security advisory page lists no advisory for the six flaws and no fix date.
Exploitation status
There is no confirmed exploitation of these six flaws. BSI says it has no information about exploitation, and neither the agencies nor the researchers link the flaws to known incidents.
That caveat matters because the AK-SM800A sits in the middle of an active campaign. BSI says the controller was involved in earlier incidents in several countries, and attacks hit refrigeration controllers in France from 11 October and in a second wave across Europe — forcing unwanted defrost cycles and destroying stock. Those intrusions are not attributed to the six newly disclosed flaws; treat the two as separate until upstream says otherwise. The government warnings are the primary sources here: the CCB advisory, Ireland's NCSC notice and the BSI warning.
Action checklist
- Get the AK-SM800A off the public internet now. Put it behind a VPN or on an isolated OT segment. Five unauthenticated root bugs with no patch leave no safe way to expose the web interface.
- Inventory your controllers and firmware. Flag every AK-SM800A and note the running version.
- Do not treat 5.4.0 as a fix. Both Midnight Blue and (after a correction) BSI say it may still be vulnerable. Upgrading to it does not close the exposure.
- Check the physical process for tampering — defrost schedules and control setpoints — given the parallel wave of defrost-sabotage attacks on this device class.
- Watch the Danfoss advisory page for an actual fix and CVE assignments, and subscribe to your national CERT's feed.
Context
This is the second refrigeration-controller disclosure to land this week, after newly disclosed root-level flaws in Copeland XWEB EVO controllers drew opportunistic probes within hours. Both sit on top of the autumn wave Hacker Posts has tracked: Danfoss controllers hijacked to force defrost cycles at French supermarkets. The shape repeats — an internet-exposed industrial controller, no authentication worth the name, and a physical cold chain on the other end — except here there is no patch to apply even if you wanted to.