Skip to content

Copeland XWEB fridge controllers probed as new flaws land

VulnCheck disclosed root-level flaws in Copeland XWEB EVO refrigeration controllers on Nov 12; sensors logged probes within hours. Five issues in the latest, EOL firmware won't be fixed.

Published 3 min read

Attackers began probing newly disclosed vulnerabilities in Copeland XWEB EVO refrigeration controllers within hours of their publication on 12 November, according to VulnCheck telemetry reported by SecurityWeek. The XWEB EVO line — originally a Dixell product, now sold under the Copeland name — is widely internet-exposed, and several of the flaws yield root with no authentication. This is the same device class French authorities and CERT-FR have flagged in an ongoing wave of refrigeration-controller compromises.

What's affected

VulnCheck reported nine flaws in firmware that predates a 2021 rewrite, and five more that also reach the latest firmware. Each reportedly yields root on test systems. SecurityWeek names two by ID:

  • CVE-2026-124014: unauthenticated write to the system configuration file (older firmware).
  • CVE-2026-124010: unauthenticated root command execution (older firmware).

Older builds also carry a hardcoded admin password and command injection via the login page. On the latest firmware, the standout issue is a predictable credential: the admin's daily password is derived from the device MAC address — exposed to unauthenticated users — and the date. An attacker can compute it offline, enable SSH, and log in as root, because the root account uses the same daily code.

Exploitation status

VulnCheck's sensors logged two probing sources: one IP sent 125 requests overnight against CVE-2026-124014, and a second sent four probes on 13 November against CVE-2026-124010. VulnCheck characterizes these as opportunistic scanners, not the October operation against French retail chains that, per SecurityWeek, French authorities have tied to an Iran-linked military unit. Onyphe data cited by VulnCheck puts roughly 2,000 XWEB EVO hosts on the public internet, against 108 for the successor XWEB Pro.

The five flaws affecting the latest firmware will not be patched: Copeland ended software support for the XWEB EVO family on 16 March 2026 and points operators to XWEB Pro. For internet-exposed EOL units, CERT-FR's assessment is blunt — compromise is highly likely.

Action checklist

  1. Get XWEB EVO off the public internet now. Put it behind a VPN or an isolated OT segment. CERT-FR calls provider-IP firewall allowlisting an emergency measure only, not a fix.
  2. Inventory your controllers. Identify XWEB EVO vs XWEB Pro and the firmware build. The EOL EVO units are the ones without a path to a patch.
  3. Plan migration to XWEB Pro for anything on the unsupported EVO firmware — there is no fix coming for the latest-firmware flaws.
  4. Rotate credentials and disable SSH where not required. The MAC-derived daily password means default and derived credentials should be treated as known to attackers.
  5. If a unit may be compromised, rebuild it. Per CERT-FR, reset, reconfigure from scratch, then re-harden — a plain reboot is not enough. Check defrost schedules and control setpoints for tampering.

Context

This is the latest beat in a campaign Hacker Posts has tracked across the autumn: the Danfoss controllers hijacked to force defrost cycles at French supermarkets, the tampering with cooling at France's national blood bank sites, and the subsequent CISA–FBI advisory urging operators to harden refrigeration and cold-chain systems. CERT-FR's ALE-012 names Danfoss AK-SC/AK-SM, Copeland XWEB and Dixell XWEB among the controllers seen compromised. The pattern is consistent: a legitimate remote-management function on an internet-exposed industrial controller, no authentication worth the name, and a physical process — food, medicine — on the other end.

Related stories