Skip to content

SonicWall ends Gen 6 firewall patches, even for critical flaws

SonicWall says Gen 6 and Gen 6.5 firewalls on SonicOS 6.x are end-of-support and get no more security patches, even critical ones. Retire them or migrate to Gen 8 / SonicOS 8.

Published 3 min read

SonicWall is telling customers to retire every Gen 6 and Gen 6.5 firewall running SonicOS 6.x, because the line is past End of Support and will receive no more firmware or security patches — "even for Critical flaws," in the company's words. The guidance is in SonicWall's product advisory, Retire Unsupported Gen 6 Firewalls, and was picked up by The Hacker News on November 20. Support for these devices can no longer be purchased or renewed, and SonicWall says there will be no exceptions for critical vulnerabilities.

What's affected

Every Gen 6 and Gen 6.5 appliance on SonicOS 6.x, including the Gen 6 NSv virtual firewalls. That spans the TZ, SOHO, NSA, NSsp, SuperMassive and NSv families — TZ300 through TZ600, SOHO/SOHO 250, NSA 2600 through NSa 6650, NSa 9250/9450/9650, SuperMassive 9200–9800, NSsp 12400/12800, and NSv 10 through NSv 1600.

Per the advisory's own table, most of these crossed End of Support during 2026:

  • NSA 2600: March 8, 2024
  • TZ300 / TZ300W: January 23, 2025
  • NSsp 12400/12800, SuperMassive 9200–9800: February 20, 2026
  • SOHO, SOHO W, TZ300P, NSa 9250/9450/9650, NSv 10–1600: April 16, 2026
  • NSa 2650: May 1, 2026
  • TZ400/TZ400W, TZ600/TZ600P, NSA 3600, NSa 3650: August 1, 2026
  • TZ350/TZ350W, TZ500/TZ500W, SOHO 250/250W, NSA 4600/5600/6600, NSa 4650/5650/6650: October 1, 2026

No CVE is attached to this notice — it's a lifecycle advisory, not a single-bug patch. The point is that any future flaw in this hardware stays unpatched.

Why it matters

SonicWall's edge devices have been a repeated exploitation target: SSL VPN and management-plane flaws on SonicOS and the SMA line have drawn active attacks and KEV listings through 2026 (see our coverage of the SonicOS SSL-VPN SAML bypass). An internet-facing firewall that will never get another patch is a standing liability, and attackers reverse-engineer SonicWall fixes on supported branches to find bugs that may also sit in the frozen Gen 6 code.

Action checklist

  1. Inventory every Gen 6 / Gen 6.5 unit on SonicOS 6.x, flagging any that is internet-exposed or terminates remote access (SSL VPN, WAN management) first.
  2. Plan migration to a Gen 8 appliance on SonicOS 8. Settings import from SonicOS 6.5 via the in-product import or the NSM Migration App, so you don't rebuild policy from scratch.
  3. Until replacement, apply SonicWall's interim hardening: disable WAN management (HTTPS, SSH, SNMP on WAN interfaces); disable SSL VPN or restrict it to known source addresses; enforce MFA on all admin and remote-access accounts and reset local passwords; disable unused services and interfaces; and monitor logs for unusual logins and config changes.
  4. Treat these steps as exposure reduction only. As SonicWall puts it: "These steps reduce exposure. They do not make an unsupported firewall secure."

Related stories